Petrochemical and Analytical Technology
Thermocouples can be put both under vacuum as well as being operated inside pressure vessels. Mounting of applicable flanges or feedthrough can be offered by THERMOCOAX.
All thermocouples have passed ATEX certification and may be used in Ex-Zones 0, 1 and 2.Dedicated products and applications
Adsorption Trap
Enrichment of specific gaseous components by trapping on an adsorbate; followed by thermal desorption for CHNS analysis.
Distillery heater
Heating crude oil probes prior to large scale distillation of batch.
GC / MS Transfer line
Quantitative transfer of analytes in a gas phase from the gas chromatograph into the mass spectrometer.
Direct inlet probe system
Transfer of low volatile substances from atmospheric conditions through a vacuum lock into the high vacuum ion source of the mass spectrometer by push rod.
Multi zone reactor furnace
Simulation of larger scale reactors with temperature homogeneity of < #13; ±1°C along the inner 60% of the furnace.
Rotating heating plate
Production of bio-diesel by means of flash pyrolysis.
Probe heater for gas analysis
Heating of zirconium oxide probe in exhaust lines for oxygen detection.
Self ignition test furnace
Determination of self ignition temperatures of liquid chemical substances according to EU regulations.
