Nuclear

Since the early days of the 1950s, our company has been suplying many different product lines to both nuclear research centres and nuclear power plants.

They comply with local regulations and conditions: supply voltage, singe - three phase, ...

THERMOCOAX is accustomed to work with a number of nuclear codes like:

RCC-M and RCC-E
KTA 14001
ASME section III - NQA 1
10 CFR 50
10 CFR 21

Full engineering capabilities

Know-how to design and engineer devices including specific THERMOCOAX cables

Development and qualification laboratory

Workshops fully equiped to manufacture systems with mechanical part and electrical interfaces

QA and QC with full authority to control and release products for shipment

Reliable products

THERMOCOAX return of experience shows an extremely high reliability of their qualified products

Ensures long life time

Dedicated products and applications

Pressurizer heaters

THERMOCOAX heaters possess an excellent internal thermal exchange, allowing a very compact design and more powerful heating.

In-core type K thermocouples lines

SSSince 1957, THERMOCOAX has developed and qualified different designs of in-core thermocouples for all kind of nuclear reactors: PWR, BWR, Fast Breeder Reactors

Heat tracing

The heating cables are meant to maintain pipes containing Boron, sodium or lead bismuth at temperature higher than their melting temperature.

Liquide level detectors

Water level detectors - Sodium level indicators.

Signal transmission cables

Temperature and radiation resistant MI cables used for neutron gamma sensors cabling..

Self Powered Neutron Detectors: SPND

Low sensitivity, long life sensors to be used as fixed in-core neutron detectors for flux mapping or for safety.

Fuel pin simulator

Used to simulate operating conditions or real nuclear fuel elements without the presence of nuclear radiations..

Heating collar for vitrification pots

To keep the fluidity of the radioactive waste before pouring into the container.